If you are a homeowner, you may have experienced the frustration of a broken garage door spring. A malfunctioning garage door can cause inconvenience, delay, and even danger. Therefore, it's important to know how to replace a garage door spring or hire a professional to do it for you. This guide will provide you with all the necessary information you need to know about garage door spring replacement.
The garage door spring plays a crucial role in the smooth operation of your garage door. The spring is responsible for lifting the weight of the door and making it easier to open and close. However, over time, the spring can become worn out and eventually break, leading to problems with your garage door. Knowing how to replace a garage door spring or when to hire a professional can save you from inconvenience, delay, and danger.
Types of Garage Door Springs
There are two types of garage door springs: torsion springs and extension springs. Torsion springs are mounted above the garage door and are designed to lift the weight of the door by winding and unwinding. Extension springs, on the other hand, are located above the horizontal tracks on either side of the door and are designed to extend and contract as the door moves up and down.
Signs of a Broken Garage Door Spring
Some signs that you have a broken garage door spring:
- The door won't open or close.
- You hear a loud noise when opening or closing the door.
- The door opens or closes unevenly.
- The door feels heavier than usual.
- You see a gap in the spring.
- The spring appears to be stretched out.
If you notice any of these signs, it's important to inspect the spring and replace it if necessary.
Safety Precautions Before Replacing a Garage Door Spring
Replacing a garage door spring can be dangerous, as the spring is under tension and can cause serious injury or even death if mishandled. Therefore, it's important to take the following safety precautions:
- Wear safety glasses and gloves.
- Make sure the garage door is closed.
- Unplug the garage door opener.
- Use a ladder that's rated for your weight.
- Use a winding bar that's the right size for the spring.
Tools Required for Replacing a Garage Door Spring
To replace a garage door spring, you will need the following tools:
- Winding bars
- Vice grips
- Socket set
- Adjustable wrench
- Tape measure
Steps for Replacing a Garage Door Spring
Here are the steps to replace a garage door spring:
- Measure the old spring.
- Buy a new spring.
- Unwind the old spring.
- Remove the old spring.
- Install the new spring.
- Wind the new spring.
- Test the door.
It's important to follow these steps carefully and accurately to avoid injury and ensure the proper functioning of your garage door.
How to Hire a Professional for Garage Door Spring Replacement
If you are not comfortable replacing a garage door spring yourself or if you don't have the necessary tools, you can hire a professional to do it for you. When hiring a professional, look for someone with experience in garage door repair and replacement. Ask for references and check their reviews online. Also, make sure they are licensed and insured. Hiring a professional can save you time, and hassle, and ensure your safety.
Average Cost for Garage Door Spring Replacement
The cost of replacing a garage door spring can vary depending on the type of spring, the size of the door, and the cost of labor in your area. On average, the cost for garage door spring replacement ranges from $200 to $400. However, the cost can be higher if you need multiple springs replaced or if you hire a professional.
DIY vs Professional Garage Door Spring Replacement
Deciding whether to replace your garage door spring yourself or hire a professional can depend on your level of experience and the tools you have available. If you have experience in DIY projects and the necessary tools, you may be able to replace the spring yourself. However, if you're unsure or don't have the necessary tools, it's best to hire a professional. Remember, your safety is the most important consideration.
Tips for Maintaining Your Garage Door Springs
To prolong the life of your garage door springs and prevent future problems, it's important to maintain them regularly. Here are some tips for maintaining your garage door springs:
- Lubricate the springs every three months.
- Inspect the springs for wear and tear.
- Keep the garage door tracks clean.
- Test the door balance periodically.
- Replace the springs before they break.
By following these tips, you can prevent future problems with your garage door springs and ensure your garage door functions properly for years to come.
Make Garage Door Spring Replacement Easy with Us!
Garage door spring replacement is an important task that homeowners should be familiar with. Knowing how to replace a garage door spring or when to hire a professional can save you time, and hassle, and ensure your safety. Remember to follow safety precautions, use the proper tools, and maintain your garage door springs regularly. By doing so, you can avoid inconvenience, delay, and danger caused by a malfunctioning garage door.