Replacing Broken Garage Door Cables: A Project in Davie

We recently completed an emergency garage door cable replacement for a customer in Davie near Dollar Tree. Percy called us because his Clopay garage door was stuck and unbalanced. After a prompt response from our technician, we diagnosed the issue and resolved it efficiently, ensuring Percy's safety on his day to day use of the garage door. 

A garage door cable is a small but a very important component of the garage door system.. These cables are usually made from strong, flexible steel wires that can handle the heavy weight of a residential garage door.

The main purpose of a garage door cable is to balance the weight of the door, helping the springs in the lifting process, for the door to operate safely and smoothly. Without the cable, the garage door would not open or close, making the garage unsafe to use.

Emergency Garage Door Cable Replacement 

Percy noticed his garage door was unbalanced and wouldn't close properly. This is a common sign that a cable snapped or worn down and a fix garage door cable. If the garage door is stuck or looks crooked, that could be a similar issue. Here's how we helped Percy with his garage cable replacement.

Our technician arrived promptly, equipped with all the necessary materials to handle the job. The first step was to inspect the garage door system. Upon examining the door, it was clear that one of the garage door cables had snapped. A garage door cable snapped can cause the door to become stuck or unbalanced.

After diagnosing the problem, we discussed the repair process and cost with Percy, which is $175 for replacing two cables. For regular garage doors like Percy’s we use 2 inches cables on each side of the door. Once he gave the approval, we began the garage door cable replacement in Davie.

Safety First: Before starting the repair, make sure to disconnect the power to the garage door opener. This prevents any accidents during the repair.

Removing the Old Cable: Next, carefully remove the broken overhead door cable from the drum and pulley system. This step requires precision, as the springs are still under tension, and mishandling them could be dangerous.

Installing the New Cable: Then install a new cable, ensuring it was the correct size and strength for the door. The cable was seated around the drum and securely fastened to the garage door.

Note: Garage door cables have to be in the same length, this is the reason why both garage door cables should be replaced at the same time. Otherwise, it will not be able to pick up the garage door and the door will not go up.

After installation, we balanced the door, adjusted the tension on the springs and tested its movement to make sure everything was working smoothly. The door was now balanced, and the garage door service was completed within two hours, including the clean up.

• Don’t attempt to open or close the door manually. A broken cable can make the door very heavy and dangerous to handle.
• Don’t stand under the door or even walk under the door as it could fall anytime and could be really dangerous.
• Don’t try to repair the cable on your own. Garage door cables are under a lot of tension, and improper handling can lead to injury.

• Do contact a trusted garage door company like Unity Garage Door Repair & Installation to have the garage door fixed.
• Do schedule regular maintenance for the garage door. Regular inspections can prevent unexpected issues like broken cables.

If you find yourself in a similar situation with Percy, make sure to address the issue promptly with the help of professionals and never attempt to touch the garage door if the cables break. We’re a local garage door company serving the cities Davie, Fort Lauderdale, Plantation, and other nearby areas. For emergency garage door repair in Davie, our expert and friendly technicians usually come even on short notice.

We always keep a good amount of garage door parts in stock so that same day repairs will be handled fast just like how we did for Percy. Schedule garage door repair online, free repair analysis will be provided, and we will do the job on-site!